Updated December 6, 2024 . AmFam Team
Electricity is a vital component for your business. That’s why it’s important for you and your employees to take steps so that you’re protected while using it. Keep both your employees and business safe with these guidelines for using, updating and installing electricity.
Require training: Make sure anyone working on or around electrical systems and equipment is properly trained.
Check for damage: Frequently inspect power cords and plugs to be sure they are not cracked, frayed or damaged.
Extend with care: Only use extension cords temporarily and limit the equipment plugged into them.
Power down properly: When working on any electrical device, make sure the power is off and use proper lockout/tag-out procedures.
Call the pros: If repair or service work becomes more difficult than you anticipated, revise your plans and call in a more highly trained technician.
Respect the watt: Always use the recommended wattage when replacing light bulbs and the recommended amperage when replacing fuses.
Assess demand: As your business adds or replaces equipment, be certain the electrical system is capable of safely handling increased demand.
Use trusted goods: Only use appliances, tools, lighting and extension cords approved by a nationally recognized testing laboratory, such as Underwriters Laboratories (UL).
Watch for water: Always use Ground Fault Circuit Interrupters (GFCI) in any area where water and electricity can come into contact. Outdoor outlets should have waterproof covers and be GFCI-protected.
By following these easy safety tips, you and your business are on the right track toward safeguarding against injuries or property damage. Great job staying proactive when it comes to protecting your business dream!
This article is for informational purposes only. The information is widely available through different sources. This information does not, and is not intended to, constitute legal advice. Compliance does not guarantee conformity with building codes, or federal, state, or local laws and regulations, nor does it guarantee coverage. We do not make any guarantees or promise any results based on this information.
The loss control services listed above follow generally accepted safety standards. Compliance does not guarantee that you will be in conformance with any building code, or federal, state, or local regulations regarding safety or fire. Compliance does not ensure the absolute safety of your operations or place of business.